GFI Software

Welcome to the GFI Software community forum! For support please open a ticket from https://support.gfi.com.

Home » Product Feedback » Kerio Control Feedback » Install Kerio Control on Proliant DL20 Gen10 (UEFI)
icon4.gif  Install Kerio Control on Proliant DL20 Gen10 (UEFI) [message #149815] Thu, 27 May 2021 18:03 Go to next message
vitor is currently offline  vitor
Messages: 3
Registered: May 2021
I tried to install Kerio control Software Appliance (9.3.6-5738) on the HP server DL20 Gen10 in UEFI mode Boot - but boot from installed image (both on CD and FlashDisk) fails (not UEFI bootable device).

What I need to do to run the package in UEFI boot mode ???

In Legacy boot mode - no problem, but in this mode RAID Controller is not working (in HP hardware policy) and HDD`s not present...

Thank you in advance!
Re: Install Kerio Control on Proliant DL20 Gen10 (UEFI) [message #149819 is a reply to message #149815] Thu, 27 May 2021 19:27 Go to previous messageGo to next message
kabo.kgwarae is currently offline  kabo.kgwarae
Messages: 16
Registered: April 2021
UEFI boot is not supported yet as well as the RAID

https://support.keriocontrol.gfi.com/hc/en-us/articles/36001 5189599


GFI Customer Support Edge Team
Re: Install Kerio Control on Proliant DL20 Gen10 (UEFI) [message #151098 is a reply to message #149815] Mon, 14 February 2022 11:28 Go to previous messageGo to next message
Howard
Messages: 12
Registered: March 2019
This is really unacceptable considering the UEFI spec is 14 years old and has now been common on servers for over a decade. Kerio Control worked ok on a Gen 9 HP when put into legacy mode. On a Gen10 with hardware RAID (or built in SW RAID) it no longer works.
If GFI are to be taken seriously in the business market the development effort needs to keep up with at least the basics like UEFI.
I believe the kernel used in even the latest Kerio Control release is way too old to support this.
Re: Install Kerio Control on Proliant DL20 Gen10 (UEFI) [message #151177 is a reply to message #151098] Mon, 28 February 2022 07:55 Go to previous messageGo to next message
Danegal is currently offline  Danegal
Messages: 2
Registered: February 2022
I support.
Faced the same situation on the Supermicro SYS-5019A-FTN4. This is unacceptable!
Re: Install Kerio Control on Proliant DL20 Gen10 (UEFI) [message #151178 is a reply to message #151098] Mon, 28 February 2022 07:56 Go to previous message
Danegal is currently offline  Danegal
Messages: 2
Registered: February 2022
I support.
Faced the same situation on the Supermicro SYS-5019A-FTN4. This is unacceptable!
Previous Topic: Configuring the separate traffic rules for websites behind a reverse proxy
Next Topic: Windows 11
Goto Forum:
  


Current Time: Thu Sep 29 18:34:47 CEST 2022

Total time taken to generate the page: 0.02231 seconds