 Install Kerio Control on Proliant DL20 Gen10 (UEFI) [message #149815] |
Thu, 27 May 2021 18:03  |
vitor
Messages: 3
Registered: May 2021
|
|
|
|
I tried to install Kerio control Software Appliance (9.3.6-5738) on the HP server DL20 Gen10 in UEFI mode Boot - but boot from installed image (both on CD and FlashDisk) fails (not UEFI bootable device).
What I need to do to run the package in UEFI boot mode ???
In Legacy boot mode - no problem, but in this mode RAID Controller is not working (in HP hardware policy) and HDD`s not present...
Thank you in advance!
|
|
|
|
|
|
| Re: Install Kerio Control on Proliant DL20 Gen10 (UEFI) [message #151098 is a reply to message #149815] |
Mon, 14 February 2022 11:28  |
Howard
Messages: 12
Registered: March 2019
|
|
|
|
This is really unacceptable considering the UEFI spec is 14 years old and has now been common on servers for over a decade. Kerio Control worked ok on a Gen 9 HP when put into legacy mode. On a Gen10 with hardware RAID (or built in SW RAID) it no longer works.
If GFI are to be taken seriously in the business market the development effort needs to keep up with at least the basics like UEFI.
I believe the kernel used in even the latest Kerio Control release is way too old to support this.
|
|
|
|
|
|
|
|
Members
Search
Help
Register
Login
Home
