GFI Software Aurea SMB Solutions


Home » GFI User Forums » Kerio Control » Port forwarding help
Port forwarding help [message #145912] Tue, 04 June 2019 11:55 Go to next message
Bif71 is currently offline  Bif71
Messages: 1
Registered: June 2019
Location: Italy
Hello everyone, I would like help configuring the network traffic rules (port forwarding).
I tried with some rules but I couldn't.
The structure is as follows:
Router with Public IP (eg 70.0.11.3) static with NAT on network 192.168.1.0
Kerio Control example:
WAN: 192.168.1.100
LAN: 192.168.60.0
IP Server: 192.168.60. 200
I would like to make direct access to an internal server on http on port 9000
I tried some rules but couldn't.
I ask you for help in understanding how these rules work.
Thank you all
Re: Port forwarding help [message #145915 is a reply to message #145912] Tue, 04 June 2019 23:07 Go to previous message
billybob is currently offline  billybob
Messages: 27
Registered: October 2018
External Router (70.0.11.3) DNAT 192.168.1.100 port 9000 or better yet put your kerio control as dmz host.
On kerio control create a firewall rule Internal Server > Source Any > Destination Firewall > Service Port 9000 > Action Allow > Translation NAT LAN (internal kerio network name)/enable src NAT interface LAN and then enable destination NAT section and use IP 192.168.60. 200

Previous Topic: Possible memory leak in 9.3.0?
Next Topic: Having a serious issue on Kerio Control: 9.2.8 build 3061
Goto Forum:
  


Current Time: Sat Jul 20 19:45:35 CEST 2019

Total time taken to generate the page: 0.02793 seconds