GFI Software

Welcome to the GFI Software community forum! For support please open a ticket from https://support.gfi.com.

Home » GFI User Forums » Kerio Control » Kerio Control 8 support SNMP monitoring?
Kerio Control 8 support SNMP monitoring? [message #102017] Mon, 29 April 2013 13:42 Go to next message
maa1 is currently offline  maa1
Messages: 90
Registered: April 2005
Kerio Control 8 support SNMP monitoring?
Re: Kerio Control 8 support SNMP monitoring? [message #102059 is a reply to message #102017] Tue, 30 April 2013 06:58 Go to previous messageGo to next message
mlee (Kerio)
Messages: 211
Registered: October 2012
Location: Sydney
Unfortunately, Kerio Control currently does not support SNMP. Please use the Suggest Idea button on the main page of the administration interface to pass your feature request right to the development team.

PTSD. BP. OCD. ASPD. BPD. Certified.
Re: Kerio Control 8 support SNMP monitoring? [message #103094 is a reply to message #102059] Thu, 23 May 2013 07:47 Go to previous messageGo to next message
mlee (Kerio)
Messages: 211
Registered: October 2012
Location: Sydney
FYI Kerio Control 8.1 will have SNMP support, it is currently on Beta:
http://download.kerio.com/dwn/kerio-control-beta-notes-en.pd f


PTSD. BP. OCD. ASPD. BPD. Certified.
Re: Kerio Control 8 support SNMP monitoring? [message #104636 is a reply to message #102017] Thu, 11 July 2013 15:00 Go to previous messageGo to next message
maa1 is currently offline  maa1
Messages: 90
Registered: April 2005
I'm using PRTG Network Monitor for server monitoring.
Auto-discovery does not find any network interface on the server with Control 8.1.0. You are using a non-standard oid's?
Re: Kerio Control 8 support SNMP monitoring? [message #104676 is a reply to message #104636] Fri, 12 July 2013 15:51 Go to previous messageGo to next message
an2ny79 is currently offline  an2ny79
Messages: 11
Registered: October 2004
Location: Planet Mars
it's supported now (v8.1.0 release)
Re: Kerio Control 8 support SNMP monitoring? [message #104706 is a reply to message #102017] Mon, 15 July 2013 13:58 Go to previous messageGo to next message
pdinformatics is currently offline  pdinformatics
Messages: 2
Registered: July 2013
hi , i have the same problem like maa1
in Paesller prtg i can connect to kerio control snmp using both v2c( public community ) and v3 (sha authentication ) , and it detects sensors like free memory , hdd free space , linux load , cpu usage , and also ping and http checks work fine , but it do not detect any bandwidth sensors .
i want to control the bandwidth usage of kerio control box using snmp but i cant. Sad

also in wiki it said to use snmpwalk to view list of available commands and objects but in ssh when i use snmpwalk , busybox return error of
~ # snmpwalk
-sh: snmpwalk: not found

kb.kerio.com/product/kerio-control/server-configuration-keri o-control/snmp-monitoring-1429.html

how should i use snmpwalk and find snmp bandwidth sensors commands?
Re: Kerio Control 8 support SNMP monitoring? [message #114868 is a reply to message #104706] Tue, 15 July 2014 13:25 Go to previous messageGo to next message
ictandme is currently offline  ictandme
Messages: 370
Registered: August 2009
Location: Netherlands

SNMP isn't working well with the latest versions.
It is very basic information, no traffic information.


ICT and Me
Carlo Turk
The Netherlands
www.ictandme.com
Re: Kerio Control 8 support SNMP monitoring? [message #120339 is a reply to message #104706] Fri, 27 March 2015 08:11 Go to previous messageGo to next message
Twin is currently offline  Twin
Messages: 3
Registered: October 2013
Location: Surgut, Russia
snmpwalk -v2c -c public x.x.x.x

-v2c - version snmp
-c public - community

[example<_at_>linux ~]$ snmpwalk -v2c -c public 192.168.55.1
SNMPv2-MIB::sysDescr.0 = STRING: Kerio Control 8.4.3 build 3108; Kerio OS
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.10311.11.1.2
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (8633666) 23:58:56.66
SNMPv2-MIB::sysContact.0 = STRING: Example Name
SNMPv2-MIB::sysName.0 = STRING: router.example.com
SNMPv2-MIB::sysLocation.0 = STRING: Gateserver
SNMPv2-MIB::sysServices.0 = INTEGER: 126
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORID.1 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
SNMPv2-MIB::sysORDescr.1 = STRING: View-based Access Control Model for SNMP.
SNMPv2-MIB::sysORUpTime.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifIndex.198 = INTEGER: 198
IF-MIB::ifIndex.239 = INTEGER: 239
IF-MIB::ifIndex.244 = INTEGER: 244
IF-MIB::ifIndex.319 = INTEGER: 319
IF-MIB::ifIndex.345 = INTEGER: 345
IF-MIB::ifIndex.558 = INTEGER: 558
IF-MIB::ifIndex.642 = INTEGER: 642
IF-MIB::ifIndex.672 = INTEGER: 672
IF-MIB::ifIndex.691 = INTEGER: 691
IF-MIB::ifDescr.198 = STRING: Ethernet 5 (eth4)
IF-MIB::ifDescr.239 = STRING: Inet iF 1 (eth0)
IF-MIB::ifDescr.244 = STRING: Local Int (eth5)
IF-MIB::ifDescr.319 = STRING: VPN Server (VPN Server)
IF-MIB::ifDescr.345 = STRING: Data Int (eth3)
IF-MIB::ifDescr.558 = STRING: Inet if2 (eth2)
IF-MIB::ifDescr.642 = STRING: Ethernet 7 (usb0)
IF-MIB::ifDescr.672 = STRING: Ethernet 2 (eth1)
IF-MIB::ifDescr.691 = STRING: Krt_Mikro (tunnel 9)
IF-MIB::ifType.198 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.239 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.244 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.319 = INTEGER: propVirtual(53)
IF-MIB::ifType.345 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.558 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.642 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.672 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.691 = INTEGER: propVirtual(53)
IF-MIB::ifMtu.198 = INTEGER: 1500
IF-MIB::ifMtu.239 = INTEGER: 1500
IF-MIB::ifMtu.244 = INTEGER: 1500
IF-MIB::ifMtu.319 = INTEGER: 0
IF-MIB::ifMtu.345 = INTEGER: 1500
IF-MIB::ifMtu.558 = INTEGER: 1500
IF-MIB::ifMtu.642 = INTEGER: 1500
IF-MIB::ifMtu.672 = INTEGER: 1500
IF-MIB::ifMtu.691 = INTEGER: 0
IF-MIB::ifPhysAddress.198 = STRING: XX:XX:XX:2d:d6:91
IF-MIB::ifPhysAddress.239 = STRING: XX:XX:XX:4d:3c:54
IF-MIB::ifPhysAddress.244 = STRING: XX:XX:XX:4d:3c:57
IF-MIB::ifPhysAddress.319 = STRING:
IF-MIB::ifPhysAddress.345 = STRING: XX:XX:XX:4d:3c:56
IF-MIB::ifPhysAddress.558 = STRING: XX:XX:XX:4d:3c:55
IF-MIB::ifPhysAddress.642 = STRING: XX:XX:XX:2d:d6:93
IF-MIB::ifPhysAddress.672 = STRING: XX:XX:XX:2d:d6:90
IF-MIB::ifPhysAddress.691 = STRING:
IF-MIB::ifAdminStatus.198 = INTEGER: down(2)
IF-MIB::ifAdminStatus.239 = INTEGER: up(1)
IF-MIB::ifAdminStatus.244 = INTEGER: up(1)
IF-MIB::ifAdminStatus.319 = INTEGER: up(1)
IF-MIB::ifAdminStatus.345 = INTEGER: up(1)
IF-MIB::ifAdminStatus.558 = INTEGER: up(1)
IF-MIB::ifAdminStatus.642 = INTEGER: down(2)
IF-MIB::ifAdminStatus.672 = INTEGER: down(2)
IF-MIB::ifAdminStatus.691 = INTEGER: up(1)
IF-MIB::ifOperStatus.198 = INTEGER: down(2)
IF-MIB::ifOperStatus.239 = INTEGER: up(1)
IF-MIB::ifOperStatus.244 = INTEGER: up(1)
IF-MIB::ifOperStatus.319 = INTEGER: up(1)
IF-MIB::ifOperStatus.345 = INTEGER: up(1)
IF-MIB::ifOperStatus.558 = INTEGER: up(1)
IF-MIB::ifOperStatus.642 = INTEGER: down(2)
IF-MIB::ifOperStatus.672 = INTEGER: down(2)
IF-MIB::ifOperStatus.691 = INTEGER: up(1)
IF-MIB::ifInOctets.198 = Counter32: 0
IF-MIB::ifInOctets.239 = Counter32: 2504910674
IF-MIB::ifInOctets.244 = Counter32: 1691219817
IF-MIB::ifInOctets.319 = Counter32: 2453148567
IF-MIB::ifInOctets.345 = Counter32: 2952373359
IF-MIB::ifInOctets.558 = Counter32: 3837001979
IF-MIB::ifInOctets.642 = Counter32: 12728
IF-MIB::ifInOctets.672 = Counter32: 29298
IF-MIB::ifInOctets.691 = Counter32: 3797569761
IF-MIB::ifOutOctets.198 = Counter32: 0
IF-MIB::ifOutOctets.239 = Counter32: 1023491382
IF-MIB::ifOutOctets.244 = Counter32: 823783981
IF-MIB::ifOutOctets.319 = Counter32: 588922435
IF-MIB::ifOutOctets.345 = Counter32: 167339504
IF-MIB::ifOutOctets.558 = Counter32: 2532484653
IF-MIB::ifOutOctets.642 = Counter32: 712
IF-MIB::ifOutOctets.672 = Counter32: 0
IF-MIB::ifOutOctets.691 = Counter32: 1612787422

-------------------------
To view numbers OID's

snmpwalk -v2c -O n -c public x.x.x.x

-v2c - version snmp
-c public - community

[example<_at_>zabbix ~]$ snmpwalk -v2c -O n -c public 192.168.55.1
.1.3.6.1.2.1.1.1.0 = STRING: Kerio Control 8.4.3 build 3108; Kerio OS
.1.3.6.1.2.1.1.2.0 = OID: .1.3.6.1.4.1.10311.11.1.2
.1.3.6.1.2.1.1.3.0 = Timeticks: (8668010) 1 day, 0:04:40.10
.1.3.6.1.2.1.1.4.0 = STRING: Example Name
.1.3.6.1.2.1.1.5.0 = STRING: router.example.com
.1.3.6.1.2.1.1.6.0 = STRING: Gateserver
.1.3.6.1.2.1.1.7.0 = INTEGER: 126
.1.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00
.1.3.6.1.2.1.1.9.1.2.1 = OID: .1.3.6.1.6.3.16.2.2.1
.1.3.6.1.2.1.1.9.1.3.1 = STRING: View-based Access Control Model for SNMP.
.1.3.6.1.2.1.1.9.1.4.1 = Timeticks: (0) 0:00:00.00
--cut---
Re: Kerio Control 8 support SNMP monitoring? [message #120463 is a reply to message #102017] Fri, 03 April 2015 14:36 Go to previous messageGo to next message
aeccles is currently offline  aeccles
Messages: 3
Registered: April 2015
Is that everything? Yikes!

We really, really need to be able to get things like:

Firmware Status (up to date?)
backup status
license status or expiration date
active user count

We just became a partner and have already deployed 6 or 7 units in the last 2 months, but if we cannot monitor critical items like this I think we will be re-evaluating this partnership.
Re: Kerio Control 8 support SNMP monitoring? [message #120468 is a reply to message #120463] Fri, 03 April 2015 18:48 Go to previous messageGo to next message
Petr Dobry (Kerio) is currently offline  Petr Dobry (Kerio)
Messages: 405
Registered: November 2003

Kerio Technologies
aeccles wrote on Fri, 03 April 2015 14:36
We really, really need to be able to get things like:

Firmware Status (up to date?)
backup status
license status or expiration date
active user count


These items can be monitored using Kerio Control API - http://www.kerio.com/learn-community/developer-zone/details# keriocontrol


Petr Dobry
Product Development Manager | Kerio
Re: Kerio Control 8 support SNMP monitoring? [message #120469 is a reply to message #120468] Fri, 03 April 2015 22:25 Go to previous messageGo to next message
aeccles is currently offline  aeccles
Messages: 3
Registered: April 2015
Thanks Petr, but is there any way you could make those values accessible though SNMP?

It would be incredibly beneficial for us as it would allow us to monitor those values with our monitoring / management platform.
Re: Kerio Control 8 support SNMP monitoring? [message #120473 is a reply to message #102017] Sat, 04 April 2015 10:47 Go to previous messageGo to next message
ictandme is currently offline  ictandme
Messages: 370
Registered: August 2009
Location: Netherlands

SNMP was working perfect with "The Dude" but last few versions of Control it isn't.
I can't get Traffic readings from the interfaces anymore.
And I agree that some information is still missing in SNMP.

But I really need the Traffic monitoring back. Very important for monitoring.
Please bring back the traffic counters on the interfaces.


ICT and Me
Carlo Turk
The Netherlands
www.ictandme.com
Re: Kerio Control 8 support SNMP monitoring? [message #120499 is a reply to message #120473] Mon, 06 April 2015 22:46 Go to previous message
aeccles is currently offline  aeccles
Messages: 3
Registered: April 2015
This is very surprising. SNMP is the standard for every monitoring product on the market. In fact, I haven't seen a product that doesn't have extensive SNMP support for many, many years.

Can someone from Kerio comment and let us know if we can expect SNMP enhancements in the near future?


Previous Topic: Multiple network interfaces
Next Topic: Setuping Kerio. Confusion.
Goto Forum:
  


Current Time: Sat Jun 10 23:14:03 CEST 2023

Total time taken to generate the page: 0.03100 seconds