GFI Forums: Kerio Control » VPN Client Installation Problem on Windows 7 64 bit

Home » GFI User Forums » Kerio Control » VPN Client Installation Problem on Windows 7 64 bit (KVPNCSvc Service doesn't start (error 1920))

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

VPN Client Installation Problem on Windows 7 64 bit [message #95701]

Thu, 08 November 2012 12:38

Consumer
Messages: 10
Registered: November 2012

I can't install Kerio VPN Service onto my Windows 7 Professional SP1 Laptop 64-bit.

Same with another Windows 7 Desktop Version 64-bit.

On the laptop I tried it numerous times with different Kerio VPN Client versions.

7.4.0-4986
7.3.2-4445
7.3.1-4142
7.2.2-3782 Patch4
.
.
.
and and and

Primary I tried it with 64-bit version and some 32-bit version.
Only 7.0.0 installed however the service couldn't be started there either.
With or without Admin rights the problem stayed the same.
It didn't matter if I let the service connect with desktop or run with domain admin rights.
Nor did it matter that I let the KVPNCSvc.exe run in xp sp3 mode or admin rights activated.

Non solved the problem.

Kerio always installs into the "Program Files (x86)" folder be it 64-bit or 32-bit version.

Kerio\VPN Client\logs

error.log :
---

[08/Nov/2012 12:17:05] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:17:10] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:17:16] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:17:22] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:17:27] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:17:33] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:17:38] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:26:41] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:26:47] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:26:52] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:26:58] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:27:04] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:27:09] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:27:15] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:28:08] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:28:14] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:28:19] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:28:25] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:28:31] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:28:36] RpcServer: TinyDB Server error: 10013 (bind() failed).
[08/Nov/2012 12:28:42] RpcServer: TinyDB Server error: 10013 (bind() failed).

---

debug.log :
---

[08/Nov/2012 12:17:05] {info} Kerio VPN Client Service 7.4.0 build 4986 started.
[08/Nov/2012 12:17:05] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:05] {engine} Reading configuration.
[08/Nov/2012 12:17:05] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:17:05] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:05] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:17:05] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:05] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:17:05] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:05] {engine} WorkerThread - sending status.
[08/Nov/2012 12:17:05] {engine} Disconnect thread ends.
[08/Nov/2012 12:17:05] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:05] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:05] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:05] {vpnMain} closing VPN driver
[08/Nov/2012 12:17:05] {info} Kerio VPN Client Service 7.4.0 build 4986 stopped.
[08/Nov/2012 12:17:10] {info} Kerio VPN Client Service 7.4.0 build 4986 started.
[08/Nov/2012 12:17:10] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:10] {engine} Reading configuration.
[08/Nov/2012 12:17:10] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:17:10] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:10] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:17:10] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:10] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:10] {engine} WorkerThread - sending status.
[08/Nov/2012 12:17:10] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:17:10] {engine} Disconnect thread ends.
[08/Nov/2012 12:17:10] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:10] {engine} WorkerThread - sending status.
[08/Nov/2012 12:17:11] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:11] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:11] {vpnMain} closing VPN driver
[08/Nov/2012 12:17:11] {info} Kerio VPN Client Service 7.4.0 build 4986 stopped.
[08/Nov/2012 12:17:16] {info} Kerio VPN Client Service 7.4.0 build 4986 started.
[08/Nov/2012 12:17:16] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:16] {engine} Reading configuration.
[08/Nov/2012 12:17:16] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:17:16] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:16] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:17:16] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:16] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:16] {engine} WorkerThread - sending status.
[08/Nov/2012 12:17:16] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:17:16] {engine} Disconnect thread ends.
[08/Nov/2012 12:17:16] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:16] {engine} WorkerThread - sending status.
[08/Nov/2012 12:17:16] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:16] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:16] {vpnMain} closing VPN driver
[08/Nov/2012 12:17:16] {info} Kerio VPN Client Service 7.4.0 build 4986 stopped.
[08/Nov/2012 12:17:22] {info} Kerio VPN Client Service 7.4.0 build 4986 started.
[08/Nov/2012 12:17:22] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:22] {engine} Reading configuration.
[08/Nov/2012 12:17:22] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:17:22] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:22] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:17:22] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:22] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:17:22] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:22] {engine} Disconnect thread ends.
[08/Nov/2012 12:17:22] {engine} WorkerThread - sending status.
[08/Nov/2012 12:17:22] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:22] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:22] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:22] {vpnMain} closing VPN driver
[08/Nov/2012 12:17:22] {info} Kerio VPN Client Service 7.4.0 build 4986 stopped.
[08/Nov/2012 12:17:27] {info} Kerio VPN Client Service 7.4.0 build 4986 started.
[08/Nov/2012 12:17:27] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:27] {engine} Reading configuration.
[08/Nov/2012 12:17:27] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:17:27] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:27] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:17:27] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:27] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:27] {engine} WorkerThread - sending status.
[08/Nov/2012 12:17:27] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:17:27] {engine} Disconnect thread ends.
[08/Nov/2012 12:17:27] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:27] {engine} WorkerThread - sending status.
[08/Nov/2012 12:17:27] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:27] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:27] {vpnMain} closing VPN driver
[08/Nov/2012 12:17:27] {info} Kerio VPN Client Service 7.4.0 build 4986 stopped.
[08/Nov/2012 12:17:33] {info} Kerio VPN Client Service 7.4.0 build 4986 started.
[08/Nov/2012 12:17:33] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:33] {engine} Reading configuration.
[08/Nov/2012 12:17:33] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:17:33] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:33] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:17:33] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:33] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:33] {engine} WorkerThread - sending status.
[08/Nov/2012 12:17:33] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:17:33] {engine} Disconnect thread ends.
[08/Nov/2012 12:17:33] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:33] {engine} WorkerThread - sending status.
[08/Nov/2012 12:17:33] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:33] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:33] {vpnMain} closing VPN driver
[08/Nov/2012 12:17:33] {info} Kerio VPN Client Service 7.4.0 build 4986 stopped.
[08/Nov/2012 12:17:38] {info} Kerio VPN Client Service 7.4.0 build 4986 started.
[08/Nov/2012 12:17:38] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:38] {engine} Reading configuration.
[08/Nov/2012 12:17:38] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:17:38] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:38] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:17:38] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:38] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:38] {engine} WorkerThread - sending status.
[08/Nov/2012 12:17:38] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:17:38] {engine} Disconnect thread ends.
[08/Nov/2012 12:17:38] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:38] {engine} WorkerThread - sending status.
[08/Nov/2012 12:17:38] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:17:38] {engine} WorkerThread signaled.
[08/Nov/2012 12:17:38] {vpnMain} closing VPN driver
[08/Nov/2012 12:17:38] {info} Kerio VPN Client Service 7.4.0 build 4986 stopped.
[08/Nov/2012 12:26:41] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:26:41] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:41] {engine} Reading configuration.
[08/Nov/2012 12:26:41] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:26:41] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:41] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:26:41] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:41] {engine} WorkerThread signaled.
[08/Nov/2012 12:26:41] {engine} WorkerThread - sending status.
[08/Nov/2012 12:26:41] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:26:41] {engine} Disconnect thread ends.
[08/Nov/2012 12:26:41] {engine} WorkerThread signaled.
[08/Nov/2012 12:26:41] {engine} WorkerThread - sending status.
[08/Nov/2012 12:26:41] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:41] {engine} WorkerThread signaled.
[08/Nov/2012 12:26:41] {vpnMain} closing VPN driver
[08/Nov/2012 12:26:41] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:26:47] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:26:47] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:47] {engine} Reading configuration.
[08/Nov/2012 12:26:47] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:26:47] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:47] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:26:47] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:47] {engine} WorkerThread signaled.
[08/Nov/2012 12:26:47] {engine} WorkerThread - sending status.
[08/Nov/2012 12:26:47] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:26:47] {engine} Disconnect thread ends.
[08/Nov/2012 12:26:47] {engine} WorkerThread signaled.
[08/Nov/2012 12:26:47] {engine} WorkerThread - sending status.
[08/Nov/2012 12:26:47] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:47] {engine} WorkerThread signaled.
[08/Nov/2012 12:26:47] {vpnMain} closing VPN driver
[08/Nov/2012 12:26:47] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:26:52] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:26:52] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:52] {engine} Reading configuration.
[08/Nov/2012 12:26:52] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:26:52] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:52] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:26:52] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:52] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:26:52] {engine} Disconnect thread ends.
[08/Nov/2012 12:26:52] {engine} WorkerThread signaled.
[08/Nov/2012 12:26:52] {engine} WorkerThread - sending status.
[08/Nov/2012 12:26:52] {engine} WorkerThread signaled.
[08/Nov/2012 12:26:53] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:53] {engine} WorkerThread signaled.
[08/Nov/2012 12:26:53] {vpnMain} closing VPN driver
[08/Nov/2012 12:26:53] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:26:58] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:26:58] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:58] {engine} Reading configuration.
[08/Nov/2012 12:26:58] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:26:58] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:58] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:26:58] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:58] {engine} WorkerThread signaled.
[08/Nov/2012 12:26:58] {engine} WorkerThread - sending status.
[08/Nov/2012 12:26:58] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:26:58] {engine} Disconnect thread ends.
[08/Nov/2012 12:26:58] {engine} WorkerThread signaled.
[08/Nov/2012 12:26:58] {engine} WorkerThread - sending status.
[08/Nov/2012 12:26:58] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:26:58] {engine} WorkerThread signaled.
[08/Nov/2012 12:26:58] {vpnMain} closing VPN driver
[08/Nov/2012 12:26:58] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:27:03] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:27:04] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:27:04] {engine} Reading configuration.
[08/Nov/2012 12:27:04] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:27:04] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:27:04] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:27:04] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:27:04] {engine} WorkerThread signaled.
[08/Nov/2012 12:27:04] {engine} WorkerThread - sending status.
[08/Nov/2012 12:27:04] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:27:04] {engine} Disconnect thread ends.
[08/Nov/2012 12:27:04] {engine} WorkerThread signaled.
[08/Nov/2012 12:27:04] {engine} WorkerThread - sending status.
[08/Nov/2012 12:27:04] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:27:04] {engine} WorkerThread signaled.
[08/Nov/2012 12:27:04] {vpnMain} closing VPN driver
[08/Nov/2012 12:27:04] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:27:09] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:27:09] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:27:09] {engine} Reading configuration.
[08/Nov/2012 12:27:09] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:27:09] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:27:09] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:27:09] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:27:09] {engine} WorkerThread signaled.
[08/Nov/2012 12:27:09] {engine} WorkerThread - sending status.
[08/Nov/2012 12:27:09] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:27:09] {engine} Disconnect thread ends.
[08/Nov/2012 12:27:09] {engine} WorkerThread signaled.
[08/Nov/2012 12:27:09] {engine} WorkerThread - sending status.
[08/Nov/2012 12:27:09] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:27:09] {engine} WorkerThread signaled.
[08/Nov/2012 12:27:09] {vpnMain} closing VPN driver
[08/Nov/2012 12:27:09] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:27:15] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:27:15] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:27:15] {engine} Reading configuration.
[08/Nov/2012 12:27:15] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:27:15] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:27:15] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:27:15] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:27:15] {engine} WorkerThread signaled.
[08/Nov/2012 12:27:15] {engine} WorkerThread - sending status.
[08/Nov/2012 12:27:15] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:27:15] {engine} Disconnect thread ends.
[08/Nov/2012 12:27:15] {engine} WorkerThread signaled.
[08/Nov/2012 12:27:15] {engine} WorkerThread - sending status.
[08/Nov/2012 12:27:15] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:27:15] {engine} WorkerThread signaled.
[08/Nov/2012 12:27:15] {vpnMain} closing VPN driver
[08/Nov/2012 12:27:15] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:28:08] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:28:08] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:08] {engine} Reading configuration.
[08/Nov/2012 12:28:08] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:28:08] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:08] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:28:08] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:08] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:08] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:08] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:28:08] {engine} Disconnect thread ends.
[08/Nov/2012 12:28:08] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:08] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:08] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:08] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:08] {vpnMain} closing VPN driver
[08/Nov/2012 12:28:08] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:28:14] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:28:14] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:14] {engine} Reading configuration.
[08/Nov/2012 12:28:14] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:28:14] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:14] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:28:14] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:14] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:14] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:14] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:28:14] {engine} Disconnect thread ends.
[08/Nov/2012 12:28:14] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:14] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:14] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:14] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:14] {vpnMain} closing VPN driver
[08/Nov/2012 12:28:14] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:28:19] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:28:19] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:19] {engine} Reading configuration.
[08/Nov/2012 12:28:19] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:28:19] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:19] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:28:19] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:19] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:19] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:19] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:28:19] {engine} Disconnect thread ends.
[08/Nov/2012 12:28:19] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:19] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:20] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:20] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:20] {vpnMain} closing VPN driver
[08/Nov/2012 12:28:20] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:28:25] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:28:25] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:25] {engine} Reading configuration.
[08/Nov/2012 12:28:25] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:28:25] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:25] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:28:25] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:25] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:25] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:25] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:28:25] {engine} Disconnect thread ends.
[08/Nov/2012 12:28:25] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:25] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:25] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:25] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:25] {vpnMain} closing VPN driver
[08/Nov/2012 12:28:25] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:28:30] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:28:31] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:31] {engine} Reading configuration.
[08/Nov/2012 12:28:31] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:28:31] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:31] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:28:31] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:31] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:31] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:31] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:28:31] {engine} Disconnect thread ends.
[08/Nov/2012 12:28:31] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:31] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:31] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:31] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:31] {vpnMain} closing VPN driver
[08/Nov/2012 12:28:31] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:28:36] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:28:36] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:36] {engine} Reading configuration.
[08/Nov/2012 12:28:36] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:28:36] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:36] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:28:36] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:36] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:36] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:36] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:28:36] {engine} Disconnect thread ends.
[08/Nov/2012 12:28:36] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:36] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:36] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:36] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:36] {vpnMain} closing VPN driver
[08/Nov/2012 12:28:36] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.
[08/Nov/2012 12:28:42] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 started.
[08/Nov/2012 12:28:42] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:42] {engine} Reading configuration.
[08/Nov/2012 12:28:42] {engine} VpnFSM: Disconnect().
[08/Nov/2012 12:28:42] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:42] {engine} VpnFSM: Sending status to Engine (disconnecting).
[08/Nov/2012 12:28:42] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:42] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:42] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:42] {engine} VpnFSM: Saving and sending status to Engine (disconnected).
[08/Nov/2012 12:28:42] {engine} Disconnect thread ends.
[08/Nov/2012 12:28:42] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:42] {engine} WorkerThread - sending status.
[08/Nov/2012 12:28:42] {engine} VpnFSM: GetStatus().
[08/Nov/2012 12:28:42] {engine} WorkerThread signaled.
[08/Nov/2012 12:28:42] {vpnMain} closing VPN driver
[08/Nov/2012 12:28:42] {info} Kerio VPN Client Service 7.2.2 patch 4 build 3782 stopped.

---

I deleted after each uninstalling of Kerio, the Kerio folder, and registry if it wasn't deleted. This log I let stay so one can see what happened.

Attachment: Kerio VPN problem.jpg
(Size: 63.89KB, Downloaded 2308 times)

Report message to a moderator

Re: VPN Client Installation Problem on Windows 7 64 bit [message #95702 is a reply to message #95701]

Thu, 08 November 2012 13:04

Consumer
Messages: 10
Registered: November 2012

I had to deaktivate the Antivirus Software so that I could install Kerio VPN Client.

After a restart the Kerio VPN Client functioned with the Antivirus Software without problem.

Report message to a moderator

Re: VPN Client Installation Problem on Windows 7 64 bit [message #95768 is a reply to message #95701]

Fri, 09 November 2012 10:31

James Bobby
Messages: 5
Registered: December 2009

Sometimes I've seen the same problem, usually turns out the Kerio Virtual Network interface (under Network Connections) has been disabled after installation, enabling it makes the Kerio service start ok.

Report message to a moderator

Re: VPN Client Installation Problem on Windows 7 64 bit [message #101433 is a reply to message #95701]

Fri, 12 April 2013 18:09

abbas_tayefeh
Messages: 1
Registered: April 2013

hi,i am iranian,i can't speak english good

i have same problam & can't resolve it.
pleas heeeeeeeeeeeeelp me

Report message to a moderator

Re: VPN Client Installation Problem on Windows 7 64 bit [message #101436 is a reply to message #101433]

Fri, 12 April 2013 18:36

Consumer
Messages: 10
Registered: November 2012

Deaktivate Antivirus/Firewall/etc then try again. Surprised

Report message to a moderator

Re: VPN Client Installation Problem on Windows 7 64 bit [message #101454 is a reply to message #101436]

Sat, 13 April 2013 14:18

mehran12345
Messages: 1
Registered: April 2013
Location: teh

i have same problam
deactive the firewall and antivirus, but i can'i install kerio clinet, pls hel meeee

Report message to a moderator

Re: VPN Client Installation Problem on Windows 7 64 bit [message #101524 is a reply to message #101454]

Mon, 15 April 2013 20:51

rjokl
Messages: 62
Registered: August 2005

> [08/Nov/2012 12:17:05] RpcServer: TinyDB Server error: 10013 (bind() failed).

what is listening on port 43434? (netstat -ano | findstr 43434)

Report message to a moderator

Re: VPN Client Installation Problem on Windows 7 64 bit [message #104253 is a reply to message #95701]

Thu, 27 June 2013 14:26

LucaP
Messages: 1
Registered: June 2013
Location: Italia

Same problem.

Solution: Uninstall application, then remove any reference on system registry (search using keyword "kerio", delete all references or system key).
Restart PC.
Reinstall application.

Report message to a moderator

Re: VPN Client Installation Problem on Windows 7 64 bit [message #104773 is a reply to message #104253]

Wed, 17 July 2013 00:13

reza
Messages: 3
Registered: July 2013

Hi
I have some problem too:
error 28201. Failed to install vpn device driver. Commond: CREATE. Action: EnableDevice. Result: 0*800F020B ,unspecified error.

could you help me to fix this error and install the program?

Report message to a moderator

Re: VPN Client Installation Problem on Windows 7 64 bit [message #107353 is a reply to message #95701]

Sat, 19 October 2013 16:58

jin6829
Messages: 2
Registered: October 2013

Hi,

Try to activate the connexion.
Go control panel> network & internet & networks connexion> try to activate kerio virtual network.

Best regards

Report message to a moderator

Re: VPN Client Installation Problem on Windows 7 64 bit [message #116354 is a reply to message #95701]

Fri, 26 September 2014 11:09

ArtBaby
Messages: 1
Registered: September 2014

this is really odd
why no one can solve error 1920 ? [service wont be started]

for god sake here is kerio forum

none of kerio programmers exists here?

please someone solves this nasty issue

Regards

Report message to a moderator

Re: VPN Client Installation Problem on Windows 7 64 bit [message #117657 is a reply to message #95701]

Thu, 20 November 2014 14:00

Ragnur
Messages: 1
Registered: November 2014

If I enable disabled Kerio network adapter, instalation works fine.

Report message to a moderator

Re: VPN Client Installation Problem on Windows 7 64 bit [message #117813 is a reply to message #95701]

Thu, 27 November 2014 19:29

AlMeGa
Messages: 2
Registered: January 2014
Location: Guatemala

Achieve install the client!

disable firewall
Disable antivirus.
Deleting records in installation folder.
Uninstall adapter (Device Manager)
Delete records (regedit)

And try to install again, and services are enabled again.

@lex4

Report message to a moderator

Previous Topic:	Direct URL Group to specific interface
Next Topic:	Kerio VPN constant disconnect

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue May 30 04:31:34 CEST 2023

Total time taken to generate the page: 0.05828 seconds