GFI Forums: Exinda Network Orchestrator » Optimize Policy Not working properly

Home » GFI User Forums » Exinda Network Orchestrator » Optimize Policy Not working properly (bandwidth Issue)

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Optimize Policy Not working properly [message #149905]

Fri, 18 June 2021 13:44

Hari Krishnan
Messages: 1
Registered: June 2021

Hi Friends,

I am facing Bandwidth Issue in exinda. When i Create policy 50Mbps for IP address but its showing only 25Mbps

Please help us to get actual assigned Bandwidth.

Thanks and Regards
Hari Krishnan

Report message to a moderator

Re: Optimize Policy Not working properly [message #149988 is a reply to message #149905]

Thu, 08 July 2021 08:39

kabo.kgwarae
Messages: 16
Registered: April 2021

Hi, Hari
Check the following:

- if something else is using most of the bandwidth(how big is the VC and what is its current utilization when you see the low speed
- if the NICs for the bridge are operating in the expected speed and duplex
- if you are still seeing the issue, open a ticket with support at https://support.exinda.gfi.com/hc/en-us

GFI Customer Support Edge Team

Report message to a moderator

Re: Optimize Policy Not working properly [message #152404 is a reply to message #149905]

Mon, 08 August 2022 13:26

upscalevalley
Messages: 4
Registered: August 2022

Hey kabo. You have helped me while solving my problem as well. Thank you so much for your help.

Report message to a moderator

Re: Optimize Policy Not working properly [message #153115 is a reply to message #149988]

Wed, 16 November 2022 03:36

reranta
Messages: 1
Registered: November 2022

kabo.kgwarae wrote on Thu, 08 July 2021 08:39

Hi, Hari
Check the following:

- if something else is using most of the bandwidth(how big is the VC and what is its current utilization when you see the low speed
- if the NICs for the bridge are operating in the expected speed and duplex
- if you are still seeing the issue, open a ticket with support at https://support.exinda.gfi.com/hc/en-us drift boss

You assisted me in resolving my issue as well.

Report message to a moderator

Re: Optimize Policy Not working properly [message #153123 is a reply to message #149988]

Thu, 17 November 2022 04:31

stoatnescafe
Messages: 4
Registered: November 2022

kabo.kgwarae wrote on Thu, 08 July 2021 08:39

Hi, Hari
Check the following:

- if something else is using most of the bandwidth(how big is the VC and what is its current utilization when you see the low speed
- if the NICs for the bridge are operating in the expected speed and duplex
- if you are still seeing the issue, open a ticket with support at https://support.exinda.gfi.com/hc/en-us

You also assisted me in resolving my difficulty. Thank you so much for your assistance

[Updated on: Wed, 28 December 2022 18:41] by Moderator

Report message to a moderator

Next Topic:

Exinda 2061 Firmware (Operating system)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jun 06 19:09:45 CEST 2023

Total time taken to generate the page: 0.02251 seconds