a) Close GFI EndPointSecurity.
b) Open Regedit (Start -> Run -> Type 'regedit' and press Enter)
b) Browse to [HKEY_LOCAL_MACHINE\SOFTWARE\GFI\EndPointSecurity3\Config]
d) Change the 'debug' dword value from '0' to '1'

a) The troubleshooter files can be generated from the GFI EndPointSecurity troubleshooter program that can be found in the GFI EndPointSecurity 3.0 program group.
b) Please answer the questions set by the troubleshooter as accurately as possible.
c) Once the troubleshooter program is finished, it will create a number of files under the GFI\EndPointSecurity 3.0\Support directory.
IMPORTANT NOTE: Please compress all files into one zip file

Should the files collected exceed 7MB or are too large for you to send, please upload to our FTP Server. The FTP details are below:
Host: ftp://ftp.gfisoftware.com
User: gfi
Pass: gfi911cust
(If using Internet Explorer use ftp://gfi:gfi911cust@ftp.gfisoftware.com)

a) Create a new folder on your machine and name it using either your ticket number or company name (e.g. domain.com)
b) Copy support.zip to the new directory.
c) Login to the FTP server.
d) Upload the directory with the troubleshooting files to the ftp server.
NOTE: When the upload is finished, you will not be able to see the directory or the files. This is done to safeguard your privacy

This should contain the following:
i)    Short Decription of the issue.
ii)   If you have posted the issue to the forums or you encounter any relevant topics on the forums, reference the url of the topic.
iii)  Include troubleshooter files or the name of the file/folder you have uploaded.

1. Install the latest EndPointSecurity build available using the "Import settings used in older build” option.
   
2. Press Apply button to update all previously installed agents [this will uninstall the older agent and install the newer one].
   
3. Restart updated machines.

1. On the Agent machine enable the "File and Printing sharing" exception from firewall
   [This will allow the EndPointSecurity main application to copy all files needed for agent deployment onto the remote Agent machine.  If this exception is disabled then the error message "Failed to contact remote computer. Computer might be offline or the specified credentials are invalid." will be displayed on the main application Deployment Report]
     
   
2. On the EndPointSecurity main application machine add the following exceptions to firewall
   • TCP Ports range 1070-1170
     [This port range is used by the agent in order to communicate its status during agent installation. If these ports aren't opened the agent deployment will most probably return a timeout because EndPointSecurity main application will not be able to get the installation status from the currently installing/uninstalling agent. Note: When a timeout occurs during an agent install/uninstall it does not mean that the operation wasn't successful but rather that communication failed.]
     
   • TCP port 1323
     This is the default port number, which is specified in toolcfg_general.xml tag <Serverport> located on main app\data folder.
     [This port is used to enable events logging. If this port is closed then the agent won't be able to pass collected events to the logger service running on the main machine thus no events will be logged into ESECLOGS database.
     Note: you can specify any other TCP port to be used for events logging. Just change it from toolcfg_general.xml tag <Serverport> and update all the agents. Agents will start sending collected events using the newly configured TCP port. Sure this port must be added to main machine firewall exceptions list.]