justty
Posts: 6
Joined: 29.Feb.2008
Status: offline
|
I have a 4 line GFI license. I just put in a Mainpine IQ Express 8 channel card. When I talked with my CDW Fax Rep he said that I would be able to designate which ports I could use on the 4 licenses.
After I ran the detect Faxmaker selected the first 4 ports as the lines I could configure. I am thinking my CDW Rep was not familiar with how GFI loaded the ports on the card. My original Brooktrout card let me select the lines I wanted to add, this is different from how the Mainpine lines loaded.
If i disabled the port in Device manager and reran detect, would it skip the disabled ports? thus allowing me to select which lines on each port I want to use.
I am asking because my original intent was to load 2 Mainpine IQ Express 8 channel cards and split my lines between the 4 interfaces. That way I could have redundancy should a card fail; I could just reconfigure the working card to handle the lines on the card that failed. To me this is a better scenario than paying for Express replacement.
Any thoughts if this is possible?
|
Printable Version
Designating Fax Lines - 
New Messages
No New Messages
Hot Topic w/ New Messages
Hot Topic w/o New Messages
Locked w/ New Messages
Locked w/o New Messages
Post New Thread